BLHVZ - REINFORCED ABRASIVE PRODUCTS 49-94-3410
- MSDS: BLHVZ
- Manufacturer: MILWAUKEE ELECTRIC TOOL CORP
- Product Name: REINFORCED ABRASIVE PRODUCTS 49-94-3410
- National Stock Number: 5350-00N020350
Product Identification
Product ID:REINFORCED ABRASIVE PRODUCTS 49-94-3410
MSDS Date:09/01/1987
FSC:5350
NIIN:00N020350
MSDS Number: BLHVZ
Responsible Party
BROOKFIELD, WI 53005
US
Emergency Phone: 800-424-9300
Info Phone: 414-781-3600
Cage: 40817
Contractor
Telephone: 414-781-3600
Cage: 40817
Ingredients
3); (ALPHA-ALUMINA)
CAS: 1344-28-1
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
SILICON CARBIDE
CAS: 409-21-2
RTECS: VW0450000
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
PHENOLIC RESIN
OSHA PEL 5 PPM
ACGIH TLV: 5 PPM
B-CHLOROPRENE (SARA III)
CAS: 126-99-8
RTECS: EI9625000
OSHA PEL S; 25 PPM
ACGIH TLV: S; 10 PPM; 9293
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
COATED GLASS BEADS; (RESIN COATED GLASS)
ACRYLONITRILE (SARA III)
CAS: 107-13-1
RTECS: AT5250000
OSHA PEL SEE 1910.1045
ACGIH TLV: S, 2 PPM;A2 9394
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
COTTON (RAW)
RTECS: GN2275000
OSHA PEL 1MG/M3,SEE 1910.1043
ACGIH TLV: 0.2 MG/M3; DUST 9293
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:INHAL:ACUTE POSSIBLE COUGH.
CHRONIC:MAY AFFECT BREATHING CAPACITY.
Explanation of Carcinogenicity:ACRYLONITRILE:CLASS 2 (NTP); CLASS 2A
(IARC) ; OSHA REGULATED. ACGIH A2.
Effects of Overexposure:SKIN AND EYE IRRITATION AND COUGHING.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES:WASH WITH LARGE AMOUNT OF WATER FOR AT LEAST 15 MINUTES.
SEEK MEDICAL ATTENTION. SKIN:WASH WITH SOAP AND WATER. SEEK MEDICAL
HELP. INGEST:SEEK MEDICAL HELP. INHAL:REMOVE TO FRESH AIR. SEEK
MEDICA L HELP.
Fire Fighting
Extinguishing Media:WATER.
Fire Fighting Procedures:NOT APPLICABLE. MEDIA SUITABLE FOR SURROUNDING
FIRE .
Accidental Release
Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:SEE ANSI B7.1
Exposure Controls
Respiratory Protection:NIOSH/MSHA ANSI APPROVED RESPIRATOR AS
RECOMMENDED.
Ventilation:LOCAL EXHAUST AND MECHANICAL VENTILATION ARE RECOMMENDED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:AS NEEDED. HEARING PROTECTION; SEE OSHA 29
CFR 1910.215.
Work Hygienic Practices:WASH FREQUENTLY WITH SOAP AND WATER.
Supplemental Safety and Health
HAZ DECOMP:GREATER THAN THE GRINDING WHEEL COMPONENTS. CONSULT RELEVENT
MSDS'S.
Chemical Properties
HCC:T7
Spec Gravity:2.30
Appearance and Odor:SOLID PRODUCT. MAY GIVE OFF SLIGHT ODOR IN USE.
Stability
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:IN USE DUST AND SLIGHT ODOR MAY BE
GENERATED. IN MOST CASES MATL MOVED FROM WORK WILL BE SIGNIFICANTLY
GREATER (SUPDAT)
Disposal
Waste Disposal Methods:LANDFILL METHODS CONSISTENT WITH LOCAL, STATE
AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.